The all new G2 Heavy Duty JK Front Dana 30 axle truss and armor system gives your JK the strength it needs
to take serious abuse.
The main structure is made from ¼" steel with 1/8" thick reinforcement plates, this truss design provides critical strengthening in a lightweight package across the whole axle, not just the long tube. All components are laser cut to precise specifications to ensure a perfect fit for easy installation. Welding is required, including to the cast center section. Professional welding skills are strongly recommended.
The G2 heavy duty JK Rubicon Front axle truss and armor system includes Lower Control Arm Skids, Inner C Gussets, Reinforced Stock Height Track Bar Bracket and main Axle Truss Assembly.
|Dana 30 Front||Dana 30 Axle Truss Kit w/ Raised Track Bar Bracket||68-2050|
|Dana 30 Axle Truss Kit w/ Stock Track Bar Bracket||68-2050-S|
|Dana 30 Axle Truss Only||68-2050-1|
|Heavy Duty Track Bar Bracket w/ Stock Track Bar Location||68-2050-4|
|Heavy Duty Track Bar Bracket w/ Raised Track Bar Location||68-2050-3|
|Dana 44 Front||Dana 44 Front Dana 44 Axle Truss Kit w/ Raised Track Bar Bracket||68-2051|
|Dana 44 Axle Truss Kit w/ Stock Track Bar Bracket||68-2051-S|
|Dana 44 Axle Truss Only||68-2051-1|
|Heavy Duty Track Bar Bracket w/ Stock Track Bar Location||68-2051-4|
|Heavy Duty Track Bar Bracket w/ Raised Track Bar Location||68-2051-3|
|Dana 44 Rear||Dana 44 Rear Axle Truss Kit||68-2052|
|Dana 44 Rear Axle Truss Only||68-2052-1|
|Heavy Duty Rear Coil Buckets||68-2052-3|
|Heavy Duty Rear Track Bar Bracket||68-2052-4|
|Upper Link Mount (used for custom 3 or 4 Link setup)||68-2052-2|